江蘇無煙平底鍋白潔布涂層耐磨試驗機/鋼絲絨涂層耐磨測試機
一、不粘鍋涂層耐磨測試機是據EN12983-2標準手冊相關要求設計制作，用于檢測炊具涂層的耐磨性能，采用電機驅動，使用鋼絲圈與加熱的炊具涂層表面作旋轉磨擦運行并可根據需要增加砝碼，可設定單次測試周期與總測試周期，可滿足不同測試需要。
二、技術參數
1.*大旋轉半徑：10CM（可微調）
2.標配砝碼：0.5KG
3.鋼絲規格：Φ1MM
4.鋼絲圈規格：Φ50MM
5.測試速度：30±2轉/分鐘（可微調）
6.測試速度：?jiǎn)纹谥芷诳烧{(diào)0-999999次
總測試周期可調0-999999次
7.電爐溫度：0-350度
8.輸入電源：220V/50HZ/3000W
三、如有什么疑問歡迎來電垂詢，我司可根據客戶的不同要求來訂做產品。
Jiangsu smokeless pan white Jiebu coating wear test machine of steel wool / coating abrasion testing machine
A nonstick coating is abrasion testing machine according to EN12983-2 standard requirements of manual design, for the detection of wear resistance of cookware coating, driven by motor, cookware coating surface using wire ring and the rotating friction heating operation can increase the weight according to the needs, can be set to a single test cycle and testing cycle, can meet the different test requirements.
Two, technical parameters
1 maximum rotation radius: 10CM (adjustable)
2 standard weight: 0.5KG
3 wire specification: 1MM
4 steel ring specification: 50MM
5 test speed: 30 + 2 Rev / min (adjustable)
6 test speed: single period adjustable 0-999999 times
The total test period can be adjusted 0-999999 times
7 furnace temperature: 0-350 degrees
8 input power: 220V/50HZ/3000W
Three, if any questions are welcome to call us, our company can be customized according to the different requirements of customers.
